The oil-water separation cloth is divided into two types: food oil-water separator and industrial oil-water separator. The catering oil-water separator is used in the catering industry for sewage treatment. Due to the requirement of environmental friendliness, industrial oil-water separators are used for the treatment of sewage discharged to the ship machinery stations in Rivers and Lakes and oceans.

What is the function of oil-water separation cloth?

Machine for oil-water separation cloth; Usually used for ship sewage treatment. Due to the requirement of environmental friendliness, the sewage produced by ship machinery discharged into Rivers and Lakes and seas is treated. The working principle and workflow of the oil-water separator system: 1. Water flows in from the AOD pump (gas film). 2. Enter the flow control valve honeycomb chamber and wash with water. There are many dense honeycomb shaped partitions inside, so while the water flows, small particles in the water sink into the honeycomb chamber, and wastewater flows in. A 4-grid water hole (5/32 ') enters the 5 adsorption and extraction chambers, and water flows into the oil adsorption chamber composed of JT57 liquid filtration medium. During this process, a large amount of oil and fat are adsorbed, extracting complex heavy metals, organic matter, TSS, BTEX, PCB, and many water pollutants. Then the water flows upwards from the adsorption chamber to the second level honeycomb chamber. The water flows up and down three times through the second level tight honeycomb partition, and the remaining trace amount of oil rises to the top and enters the water. 7 clean water rooms, water is discharged from the bottom of the clean water room. There are trace amounts of oil left in the honeycomb chamber and clean water chamber, and the olector installed at the top is removed from the container left in the external oil depot.

How to choose oil-water separation cloth?

1. Purchase regular factory oil-water separation cloth

The market price of oil-water separators ranges from hundreds to thousands, with significant differences in quality. There are also some counterfeits. If you are tempted to buy inferior products at a low price, the cost you pay may change the entire nozzle, even the engine. Therefore, when purchasing an oil-water separator, you must go to a regular repair shop to purchase mainstream brand products.

In order to ensure the fuel supply of the entire engine system, the installed oil-water separator model is greater than the original vehicle's own emissions.

2. Please pay attention to the timely drainage of the oil-water separation cloth

Don't think you can rest assured as long as you install it. There is a transparent plastic water collecting cup under the oil-water separator. When using the oil-water separator, be sure to drain the water in a timely manner. If there is too much accumulated water, the oil-water separator cannot function as an oil-water separator. David Asher.

Oil water separation cloth self draining function

Some advanced foreign enterprises have already equipped with automatic drainage functions. The filter cup under the oil-water separator has a water level sensor. When the water level reaches a certain value, it will notify the computer display screen on the instrument panel that there is water, and the oil-water separator will drain. The drainage operation is also very convenient. After parking, pull the handbrake, turn off the engine, move the ignition key to the driving position, and then press the switch on the dashboard. It takes about 18 seconds to complete the drainage. 3. Northern selection with heating function

In addition, cold weather can easily cause the water under the waterlogging cup to freeze and cause damage. Especially in the northern regions, in order to prevent the oil-water separator from freezing, thick cotton clothes are sometimes worn on the oil-water separator. However, for safety reasons, an oil-water separator with electric heating function is used.